Half a mile outside of Elliott Bay Marina, I peeked into the engine room and saw hot, strawberry-red coolant spraying out of a now-disconnected hose. Twenty knots of southerly breeze was pushing me towards Magnolia Bluff. Instinctively I dropped the anchor and shut down the engine. This was a maintenance-induced failure. I’d just had the whole cooling system apart to clean or replace several components. Although I’d test run the … Read more
January 27 – February 4, 2017 Will you be attending the Seattle Boat Show this year? If so, we hope to see you there! Our team at Slowboat will be giving a handful of free seminars at this year’s show. Come see us! Slowboat seminars, along with date, time, and location: iPhones, iPads, and Boats: Tips from a Twenty Something Cruiser Sam Landsman Saturday 1/28/17, 2:00 p.m. | Stage #4 Club … Read more
For the last several winters I’ve kept the boat in Anacortes, just an hour from the San Juan Islands. The winter boating was superb, with a dozen or more State Parks within a few hours cruise. More often than not, I was the only visitor. This winter, I’m based at Elliott Bay Marina in Seattle. And while it’s not close to deserted islands, I’m thoroughly enjoying winter cruising on Puget … Read more
Boating isn’t for everyone. Several members of my family owned sailboats at various times during my childhood, and much time was spent sailing around the Southern California coast and back and forth to Catalina Island. Much time was also spent avoiding sanding duty (“With the grain. Always with the grain.”) on my mom’s Honduras mahogany Rhodes 33, while instead, my brother and I pretended we were stranded on a tropical island, making sandals for ourselves out of … Read more
Last summer I took eight boats (nine including mine) from Anacortes to Southeast Alaska. Naturally, we experienced a few failures along the way. Below is an accounting of those failures, how we addressed them, and what lessons can be taken away. Failure: Inverter cabling This “professionally-installed” inverter cabling was woefully undersized—2 AWG rather than the specified 2/0 AWG, and the lug was 2/0 sized and poorly crimped to the cable. … Read more
Back in April, we posted an early review of the WiFi in Motion MAX Marine router from SinglePoint Communications. We promised to let you know how the system performed after some extensive testing. Now, after cruising from Puget Sound, WA up the Inside Passage through British Columbia, around Southeast Alaska (and back) on a five-month trial, we think we have enough experience to give a thorough review – of the … Read more
When we traveled in our Airstream we had a nice stainless steel Coleman cooler that did a great job for us keeping things cold and looking shiny. But the marine environment does not care about shiny. The hardware started to rust a little, and we decided we needed something tougher that could stand up to salt spray and being tossed around a bit. Enter the Yeti Tundra 50. The refrigerator on Airship (our … Read more
“Can I call you right back? A couple orcas just surfaced right in front of the boat and I don’t want to hit them,” I frantically told the U.S. Customs officer as I eased the throttle back. “No problem, that’ll happen,” the officer responded. Welcome to Alaska. We were motoring north in Tongass Narrows, on our way into Ketchikan after a three-week transit through British Columbia. Anchored in Foggy Bay … Read more